HGUS Series HGUS212-4 Heavy Girder Hanger with Double-Shear Nailing, 6-9/16 in W, 12 ga, Zinc

Name: HGUS Series HGUS212-4 Heavy Girder Hanger with Double-Shear Nailing, 6-9/16 in W, 12 ga, Zinc
Brand: Simpson Strong-Tie
SKU: 12610052

Sku: 12610052

$73.99

1 Available at San Marcos

The HGUS is an extra-heavy-capacity hanger for applications requiring girder support. This girder hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. Value-engineered, the HGUS is designed to carry high-loads for an economical price.

Can be installed after the beam is secured in place
HGUS-series hangers are tested, load rated and code compliant
Joist nails must be driven at an angle through the joist or truss into the header to achieve the table loads
Not designed for welded or nailer applications
Do not use double-shear hangers with I-joists
With 3X carrying members when 0.162 x 3-1/2 in nails are specified, use 0.162 x 2-1/2 in nails into the header and 0.162 x 3-1/2 in nails into the joist with no load reduction
When 0.148 x 3 in nails are specified, use 0.148 x 2-1/2 in nails into the header and 0.148 x 3 in nails into the joist with no load reduction
With 2X carrying members when 0.162 x 3-1/2 in nails are specified, use 0.148 x 1-1/2 in nails into the header and 0.148 x 3 in nails into the joist and reduce the load to 0.64 of the table values
When 0.148 x 3 in nails are specified, use 0.148 x 1-1/2 in nails into the header and 0.148 x 3 in nails into the joist and reduce the load to 0.77 of the table values